Hardscape Material Tool
Free Paver Calculator
Estimate how many pavers you need for a patio, walkway, driveway, or other hardscape project. This calculator helps you measure your project area, calculate paver count, add a waste allowance, and estimate base gravel, sand, and total coverage.
Enter your paver project details
Choose your area shape, enter project size, then add your paver dimensions and waste percentage. The calculator will estimate total square footage, number of pavers needed, and optional base and sand volumes for installation planning.
Formula used:
Project area (rectangle) = length × width
Project area (circle) = π × radius²
Paver area = paver length × paver width
Paver count = project area ÷ paver area
Adjusted paver count = paver count × (1 + waste %)
Base volume = area × base depth
Sand volume = area × sand depth
Project area (rectangle) = length × width
Project area (circle) = π × radius²
Paver area = paver length × paver width
Paver count = project area ÷ paver area
Adjusted paver count = paver count × (1 + waste %)
Base volume = area × base depth
Sand volume = area × sand depth
Project Area
0.00 sq ft
Total Pavers Needed
0
Pavers Before Waste
0
Waste Added
0
Single Paver Coverage
0.00 sq ft
Project shape
Rectangle
Total project area
0.00 sq ft
Base gravel needed
0.00 cu yd
Sand needed
0.00 cu yd
Waste allowance used
0.00%
Installation coverage
0.00 sq ft
This paver calculator provides an estimate only. Actual material needs can vary based on pattern layout, spacing, edging, cuts, compaction, and jobsite conditions.
Note: This tool is for informational and educational purposes only. Results are estimates and do not constitute professional advice. By using this calculator, you agree that Waldev is not liable for any errors or damages. Always verify results with official sources.
Full Disclaimer
Advertisement
